Adhesive pad

Our adhesive pads stand for advanced printing surfaces. They ensure the proper adhesion of the first layer, thus print-outs will never peel off and always look perfect. The UBOT 3D pad is designed for continuous operation at high temperatures.

The pad is made in the form of a sticker, so everyone will be able to replace it easily.

Adhesive pad

Adhesive pad

Price: 80 zł netto
98.4 zł brutto
Quantity:
+1 -1
Add to cart

Filaments

All our filaments are carefully selected and manufactured specifically for UBOT 3D printers. They are characterised by a high quality of dimensional tolerance and material mix. All materials are packaged in elegant, transparent spools, vacuum-packed with a moisture absorber and enclosed in an stylish box.

If you choose our material - you can be sure that printing will be even simpler and reliable. Thanks to the pre-settings made for UBOT 3D printers, you will not need to configure the software by yourself.

The concept of UBOT 3D printers remains unchanged – you can still use filaments made by any other manufacturer. However, it is worth choosing reliability, simplicity and better parameters reached thanks to U-materials!

Choose version:
  • U-PLA
  • U-ABS
  • U-HIPS
  • U-PET
Filaments
  • UBOT 3D pakowanie próżniowe
  • UBOT 3D opakowanie
Kolor:

Filaments U-PLA

U-PLA

U-PLA (Polylactide) is a biodegradable polymer made from natural, renewable raw materials. U-PLA is an easy-to-use and high-quality filament. You can print large lettered inscriptions and any other complicated structures. Thanks to the original modification of its composition – while retaining all the features being typical to PLA – such print-outs are more durable and less prone to damage, and its filament itself is less brittle. Due to its low shrinkage factor, this U-PLA filament does not get deformed so much during when cooled down and objects are mapped perfectly. U-PLA is also characterised by a high level of printing simplicity because it is ideally suited for UBOT 3D printers. U-PLA is the basic material for fast prototyping.

 

Special features:

  • low material shrinkage,
  • printing simplicity,
  • low printing temperature, starting from 190°C,
  • biodegradable and ecological,
  • printing can be made even with no heated table provided.
  • Diameter: 1.75 mm
  • Net weight: 1 kg
  • Gross weight: 1.25 kg

Filaments U-ABS

U-ABS – Acrylonitrile – Butadiene – Styrene

U-ABS is a material characterised by increased flow and viscosity rates and reduced temperature shrinkage. This is a material widely used in the manufacture of housings and cases for home appliances and electronic equipment Our U-ABS filament mix is unique because we have carefully selected the type of ABS characterised by its good extrusion and excellent adhesion in-between layers. Just like our other filaments, U-ABS is manufactured to very high standards of tolerance and professionally packaged. This filament has medium shrinkage parameters (higher than U-PLA but lower than standard ABS). The material is resistant to scratches and various chemicals (such as oils, fats, some diluted acids). Supports made from this material are easy to remove from objects. The material can be mechanically and chemically treated with acetone.

 

Special features:

  • medium-level shrinkage of material,
  • printing temperature from 230°C,
  • it requires a heated table from 80-100 degrees,
  • high temperature resistance up to 94°C,
  • robust and easy in treatment
  • good mechanical properties
  • Diameter: 1.75 mm
  • Net weight: 1 kg
  • Gross weight: 1.25 kg

Filaments U-HIPS

U-HIPS – High Impact Polystyrene

HIPS is a typical support material used in UBOT DUAL and other double-extruder printers. It also works well as a base material to print covers and figurines. U-HIPS print-outs are characterised by similar features to U-ABS in terms of impact resistance and stiffness. It merges layers very nicely. U-HIPS-printed elements can be sanded (or otherwise subjected to mechanical treatment), primed and painted. This is a medium shrinkage material so it is recommended to use a heated table and doors to control the cooling process.

 

Special features:

  • medium-level shrinkage of material,
  • printing temperature from 225°C,
  • a heated table is required,
  • completely soluble in D-Limonene (or orange turpentine)
  • good for painting and processing
  • Diameter: 1.75 mm
  • Net weight: 1 kg
  • Gross weight: 1.25 kg

Filaments U-PET

U-PET-G – Polyethylene terephthalate

This filament holds good optical properties and high gloss. It is characterised by a high level of impact strength and mechanical resistance. Its transparent variants are ideal for printing thin elements which – to a considerable degree – let light go through. The material is characterised by relatively low shrinkage, so it lets you print even large-sized objects. Moreover, it holds low hygroscopic parameters. Granulate from which this filament is manufactured is ISO 10993 certified. Thus, this material is allowed to come into contact with skin for for more than 30 days and even for under-skin application up to 30 days. U-PET-G also works well in the food industry.

 

Special features:

  • low material shrinkage,
  • printing temperature from 220°C,
  • resistance, impact strength
  • a heated table is recommended,
  • ISO 10993 certified,
  • easy to print,
  • glossing and transparent structure.
  • Diameter: 1.75 mm
  • Net weight: 1 kg
  • Gross weight: 1.25 kg
Price: 99 zł netto
121.77 zł brutto
Quantity:
+1 -1
Add to cart

Nozzle

Nozzle Standard

Nozzle Standard

Its standard brass nozzle is suitable for printing with most materials available on the market. It conducts heat well. Thanks to the application of various diameters, you can very accurately print small objects and larger items using large-diameter nozzles.

Price: 20 zł netto
24.6 zł brutto
Quantity:
+1 -1
Nozzle size:
Add to cart
Steel Nozzle

Steel Nozzle

The nozzle is reinforced with stainless steel. It is required for materials with high abrasive properties which cannot be treated with a standard brass nozzle. The steel nozzle has lower thermal conductivity than a standard brass nozzle.

Price: 59 zł netto
72.57 zł brutto
Quantity:
+1 -1
Nozzle size:
Add to cart
Cart (0)