P440

BUILD VOLUME 250 X 250 X 250 MM

UBOT 3D S+ PRINTER



Axle positioning accuracy: X & Y: 6.25 microns , Z: 0.6 microns
Nozzle diameter: from 0,2 to 1,2mm (nozzles are replaceable)
Types of filaments: PLA and other low shrinkage materials
Illuminated printing surface
Removable table provides easier access to printed product
Printing progress control
Allows changing filament mid print
Advanced filament sensor
CE certificate
2 years warranty (with possibility of extending the warranty)
Arrives ready to use

Recommended Simplify3d software for 190 EUR net.


  • Simplify3d
  • Education
  • Medicine
  • Motorization
  • Aeronautics
  • Jewelry
  • Design
  • Electronics
  • Mobile
  • Tuning

katalog ubot3d

UBOT 3D S PRINTER


UBOT 3D S PRINTER, in addition to the basic model features, additionally has a heated table.

As a result, a higher and constant temperature can be obtained in the chamber and, as a result, the printing cooling process can be controlled. Thanks to this function, we can print from most materials available on the market. The heated table also increases the adhesion of materials to the printing surface.

Additional features:
Heated Table
Allows printing with over 50 different types of materials: PLA,
ABS, PET, Nylon, Hips, Flex, “wood”, “copper” and many others

UBOT 3D + PRINTER


UBOT 3D + PRINTER, in addition to the basic model function, has an additional increased resolution in the X and Y axes to 3.125 micron! We achieved this by installing other stepper motors and using more advanced motor controllers.

Thanks to this your printouts will become even more accurate. Increase precision - choose UBOT 3D +

Additional features:
Two-times-higher X and Y axis resolution: 3,125 micron

UBOT 3D S+ PRINTER


UBOT 3D S + PRINTER is the most advanced model. In addition to the basic model function, it has an additional increased resolution in the X and Y axes up to 3.125 microns and a heated table.

UBOT 3D S + is a printer for professionals who value independence (multi-materiality) and very high quality printing.

3D S+ version holds features of 3D S and 3D + printer.


image

Essential information


● Axle positioning accuracy: X & Y: 6.25 microns, Z: 0.6 microns
● Nozzle diameter: from 0,2 to 1,2mm (nozzles are replaceable)
● Types of filaments: PLA and other low shrinkage materials
● Illuminated printing surface
● Removable table provides easier access to printed product
● Printing progress control
● Allows changing filament mid print
● Advanced filament sensor
● CE certificate
● 2 years warranty (with possibility of extending the warranty)
● Arrives ready to use

ONE DEVICE, MANY POSSIBILITIES


Thanks to UBOT 3D you can use most of the materials proposed by various manufacturers - from over 90% of materials available on the market! You do not have to limit yourself to one brand, and such a variety of offers will allow you to reduce operating costs. UBOT 3D allows you to create prints from any type of thermoplastics, e.g. PLA, ABS, HIPS, PET, nylon, elastic materials, wood and metal composites, and many more. Thus, it allows you to print objects with specific physical, chemical and visual properties.

FILAMENT SENSOR


If the filament runs out during printing, the printer pauses process and asks for an exchange - this saves time and material already printed. Competing printers that do not have a sensor in the absence of a filament, continue printing in the air, in this situation it is impossible to save the printout, and what has already been done goes to the trash.

P440

BUILD VOLUME 250 X 250 X 500 MM

UBOT 3D TOWER PRINTER


Axle positioning accuracy: X & Y: 6.25 microns, Z: 0.6 microns
Nozzle diameter: from 0,2 to 1,2mm (nozzles are replaceable)
Allows printing with over 50 different types of materials: PLA, ABS, PET,
Nylon, Hips, Flex, “wood”, “copper”, Carbon fiber materials and many others.
Illuminated printing surface
Removable table for easier access to printed product
Heated Table
Printing progress control
Advanced filament sensor
Allows changing filament mid print
CE certificate
2 years warranty (with possibility of extending the warranty)
Arrives ready to use


  • Education
  • Medicine
  • Motorization
  • Aeronautics
  • Architecture
  • Jewelry
  • Design
  • Electronics
  • Mobile
  • Tuning

katalog ubot3d tower
ubot-3d-tower

UBOT 3D TOWER


The UBOT 3D S printer, in addition to the basic model features, additionally has a heated table.

As a result, a higher and constant temperature can be obtained in the chamber and, as a result, the printing cooling process can be controlled. Thanks to this function, we can print from most materials available on the market. The heated table also increases the adhesion of materials to the printing surface.

Additional options:
Twice the resolution of the X and Y axes: 3.125
micron (0.003125 mm)

Essential information


● Axle positioning accuracy: X & Y: 6.25 microns, Z: 0.6 microns
● Nozzle diameter: from 0,2 to 1,2mm (nozzles are replaceable)
● Types of filaments: PLA and other low shrinkage materials
● Illuminated printing surface
● Removable table provides easier access to printed product
● Printing progress control
● Allows changing filament mid print
● Advanced filament sensor
● CE certificate
● 2 years warranty (with possibility of extending the warranty)
● Arrives ready to use

ONE DEVICE, MANY POSSIBILITIES


Thanks to UBOT 3D you can use most of the materials proposed by various manufacturers - from over 90% of materials available on the market! You do not have to limit yourself to one brand, and such a variety of offers will allow you to reduce operating costs. UBOT 3D allows you to create prints from any type of thermoplastics, e.g. PLA, ABS, HIPS, PET, nylon, elastic materials, wood and metal composites, and many more. Thus, it allows you to print objects with specific physical, chemical and visual properties.

FILAMENT SENSOR


If the filament runs out during printing, the printer pauses process and asks for an exchange - this saves time and material already printed. Competing printers that do not have a sensor in the absence of a filament, continue printing in the air, in this situation it is impossible to save the printout, and what has already been done goes to the trash.

dual

BUILD VOLUME 250 X 250 X 250 MM

UBOT 3D DUAL Printer


The UBOT 3D DUAL printer is the most advanced model intended for industrial applications. It is provided with an enhanced X and Y resolution up to 3.125 microns and heated table. The UBOT 3D DUAL printer is a two-header model. From now on even the most difficult objects which require soluble supports will not be any problem. Moreover, the DUAL model has a lockable printer top and is equipped with a casing painted white and red.

The UBOT 3 D DUAL is intended for use by professionals who value independence (application of various materials) and very high quality of printing.


  • Education
  • Medicine
  • Motorization
  • Aeronautics
  • Architecture
  • Jewelry
  • Design
  • Electronics
  • Mobile
  • Tuning

katalog ubot3d dual
dual printer

Printers are equipped with Dual Extruder.


● Build Volume: X: 250 mm Y: 230 mm Z: 250 mm
● High quality layer printing: up to 20 microns ( 0,02 mm )
● XYZ axle positioning accuracy: X & Y: 6.25 microns, Z: 0.6 microns
● Nozzle diameter: from 0,2 to 1,2mm (nozzles are replaceable)
● Allows printing with over 50 different types of materials: PLA, ABS,
PET, Nylon, Hips, Flex, “wood”, “copper”, Carbon fiber materials and
many others.
● Illuminated printing surface
● Removable table for easier access to printed product
● Heated Table
● Printing progress control
● Advanced filament sensor
● Allows changing filament mid print
● CE certificate
● 2 years warranty (with possibility of extending the warranty)
● Arrives ready to use

ONE DEVICE, MANY POSSIBILITIES


Thanks to UBOT 3D you can use most of the materials proposed by various manufacturers - from over 90% of materials available on the market! You do not have to limit yourself to one brand, and such a variety of offers will allow you to reduce operating costs. UBOT 3D allows you to create prints from any type of thermoplastics, e.g. PLA, ABS, HIPS, PET, nylon, elastic materials, wood and metal composites, and many more. Thus, it allows you to print objects with specific physical, chemical and visual properties.

FILAMENT SENSOR


If the filament runs out during printing, the printer pauses process and asks for an exchange - this saves time and material already printed. Competing printers that do not have a sensor in the absence of a filament, continue printing in the air, in this situation it is impossible to save the printout, and what has already been done goes to the trash.

Imponująca prędkość wydruku 3D

IMPRESSIVE SPEED PERFORMANCE

UBOT 3D is an innovative device that combines impressive speed with extremely high print quality. We have achieved all this thanks to the implementation of innovative solutions in the form of a trolley and a self-supporting structure with reduced inertia. In the case of UBOT 3D, it's the material that limits the machine, and not the other way around!

ADVANCED FILAMENT SENSOR

Usually, whenever the filament ends during the printing process, the object may have been damaged as a result. Fortunately that won't happen with UBOT 3D as our devices are equipped with modernized filament sensors! You no longer have to worry about running out of filament before the end of the print. The UBOT 3D built-in filament sensor always ensures that the printing process will continue without unpleasant surprises. As soon as the filament finishes, the device switches into another, and resumes the work.

Najwyższa jakoś wydruku 3D

HIGHEST PRINT QUALITY IN BUSINESS CLASS


Positioning

Thanks to the precision positioning of the trolley at 3,125 microns on both axes, the UBOT 3D printer allows you to print even the most complex and demanding projects.

Cooling System

The UBOT 3D printer is equipped with the three point cooling system, which consists of two-point filament cooling for the nozzle, and one point cooling directly to the print. Thanks to this solution, every printed object will get exactly the shape you intended it to have!

Najwyższa jakoś wydruku 3D

Our printing technology, allows thin layer printing! 0.02 mm thick.

Smooth surface

Take advantage of high print quality to create as smooth a surface as possible - with minimal roughness.

Wide range of nozzles at your disposal

The UBOT 3D printer features 0.2, 0.25, 0.3, 0.4, 0.5, 0.6, 0.8 mm nozzles providing you the tools you need to make Your print precisely as you want it to be.

Solidna obudowa drukarki 3D

REMOVABLE WORK PLATFORM


Ease of removing the printout from the work platform outside the working space

UBOT 3D printers are equipped with a removable aluminum table – which allows printed object to be easily removed beyond the work space. The table is covered with a special adhesive pad that provides good printable surface. It guarantees the correct adhesion of the first layer, so the prints never peel off and always look perfect. The UBOT 3D pad is designed for continuous work at high temperatures, making it one of the best solutions for FDM / FFF 3D printing technology.